BUNDLE: Bitaxe GAMMA v601 & SUPRA v401 (incl. Power Supply & Stand) - PRE-ORDER

PRE-ORDER: The bundle will only be shipped once the Bitaxe Gamma is available. Expected by the end of October or beginning of November.

The bundle includes:
1x Bitaxe Gamma v601 (including power supply and stand)
1x Bitaxe Supra v401 (including power supply and stand)

Features Bitaxe GAMMA

1. Performance:

• Hash Rate: 1,2 TH/s
• ASIC Chip: BM1370 (same as in the Antminer S21PRO)
• Power Consumption: 15W

2. Connectivity:

• Wi-Fi: Integrated module (ESP32-S3-WROOM-1)

3. Setup:

• Set up Wi-Fi: Connect to the miner's Wi-Fi (see display). Go to settings and connect the BitAxe to your Wi-Fi.
• Enter Bitcoin Wallet: Input a valid Bitcoin wallet address.
• Restart: After restarting, the mining process begins automatically.

4. Hardware:

• Display: 0.91" SSD1306 OLED I2C for real-time monitoring.
• Cooling: 40x40mm heatsink and 5V fan.
• Power Supply: Included 30W power supply (5V/6A), total cable length of 2.5m (2.0m + 0.5m). The power supply is overdimensioned to prevent overheating.

5. Open-Source & Community:

• Design: Open-source, allowing for community-driven development.

6. Additional Info:

• OSMU: $5 per miner donated to Open Source Miners United.
• Stand: The stand from this Thingiverse link is included in the package.

7. Note:

• The performance and efficiency of the device heavily depend on the clock frequency of the ASIC chip. Overclocking without sufficient cooling can damage the device. No warranty is provided for damage caused by overclocking. Additionally, no warranty is provided for future firmware versions beyond the state at the time of delivery.
  

Features Bitaxe SUPRA

1. Performance:

• Hash Rate: 733 GH/s
• ASIC Chip: BM1368 (same as in the Antminer S21)
• Power Consumption: 17.5 W/TH

2. Connectivity:

• Wi-Fi: Integrated module (ESP32-S3-WROOM-1)

3. Setup:

• Set up Wi-Fi: Connect to the miner's Wi-Fi (see display). Go to settings and connect the BitAxe to your Wi-Fi.
• Enter Bitcoin Wallet: Input a valid Bitcoin wallet address.
• Restart: After restarting, the mining process begins automatically.

4. Hardware:

• Display: 0.91" SSD1306 OLED I2C for real-time monitoring.
• Cooling: 40x40mm heatsink and 5V fan.
• Power Supply: Included 25W power supply (5V/5A), total cable length of 2m (1.5m + 0.5m). The power supply is overdimensioned to prevent overheating.

5. Open-Source & Community:

• Design: Open-source, allowing for community-driven development.

6. Additional Info:

• OSMU: $5 per miner donated to Open Source Miners United.
• Stand: The stand from this Thingiverse link is included in the package.

7. Note:

• The performance and efficiency of the device heavily depend on the clock frequency of the ASIC chip. Overclocking without sufficient cooling can damage the device. No warranty is provided for damage caused by overclocking. Additionally, no warranty is provided for future firmware versions beyond the state at the time of delivery.
  
  

Ready to use in just 2 minutes: Youtube Tutorial
Further information at: bitaxe.org